Category Archives: Ballz to the Wall

Ballz to the Wall

Like the name describes, this pedal packs balls – and lots of it. Meant to be use in front of distortion, use it to boost that bottom end that your amp is missing, or even thin it out with the thickness control. This design lets the balls hit the wall without muddying up your signal by cleaning up till there is little to no distortion – all while still droppin’ the bass. But if you do want to play in the mud, don’t be afraid to turn the Sanity down and get dirty, ’cause there’s nothing like the sound of ripped speakers in the morning.

CONTROLS AND SPECS

Operation: Mono input, mono output.
Power Requirements: 9vDC Regulated power supply, polarity +(O-
Bypass: True-bypass using a 3PDT foot switch.
Knobs:
Vol – Controls the pedal’s output.
Sanity – Controls the amount of overdrive.
Thickness – Controls the type of clipping, JFET/Germanium or LED/Germanium
2nd Foot Switch – Engages the bass boost, may be Latching or  Non-Latching depending on request.
Warranty: Limited 2-year