$10.00
Retrofit IEC-C14 mains connector for AMPEX 351 electronic assemblies.
10 in stock
Description
This is designed to replace the 2-pin mains connector on AMPEX 351 (and other models that use the same connector) with a 3-pin/earthed IEC-C14.
It requires no modification to the existing hole. Simply disconnect the wires from the old one, remove it, install the new IEC-C14, reconnect the wires and add an appropriately sized wire to the metal frame from the earth pin on the new connector.
These are also handy for folks without an IEC-C14 connector punch, as a round 1-1/8″ hole can be drilled or punched instead of the rectangular one usually required.
Connector CAD drawing download: 001-002-03
Additional information
| Weight | 0.012 kg |
|---|---|
| Dimensions | 4.5 × 4.5 × 2.5 cm |